-
Frequency Response (±3 dB) : 80 Hz - 20 kHz Frequency Range (-10 dB) : 68 Hz - 22 kHz Nominal Impedance : HF: 16Ω, LF bi amp mode: 8Ω and LF tri amp mode: 16Ω (×2) Maximum Output (dB SPL at 1 m) Continuous / Peak : HF : 126 dB / 132 dB and LF : 122 dB / 128 dB Nominal Coverage : Horizontal 140 degrees and Vertical: dependent on number of elements used Dimensions (HWD) inches : 11.8 x 27 x 13.4 -
QSC WL118-sw-BK is a Subwoofer Transducers Low Frequency : 850 W, 8Ω 18-inch woofer with a 4-inch voice coil, ceramic magnet assembly Frequency Response (±3 dB) : 32 Hz - 200 Hz Frequency Range (-10 dB) : 29 Hz - 800 Hz Nominal Impedance : 8Ω Continuous Power Capacity : LF: 850 W Dimensions (HWD) inches : 22.1 x 27.6 x 30.3 in -
QSC AP-212sw is a folded baffle subwoofer using Directivity Matched Transition (DMT) in 2-way models ensures smooth, coherent power response across the listening plane. Frequency response : 35 Hz - 250 Hz Maximum SPL at 1 m (passive) : 122 dB continuous and 128 dB peak Rated Impedance : 4Ω LF transducer : Two 305 mm (12-inch) weather resistant cone woofers with 64 mm (2.5 in) voice coil Dimensions (H×W×D) : 26" × 15" × 24" / 660 × 381 × 610 mm -
QSC AP-4122m is a Coaxial Multipurpose Speaker using Directivity Matched Transition (DMT) in 2-way models ensures smooth, coherent power response across the listening plane. Frequency response (-10 dB) : 55 Hz - 20 kHz Coverage angle : 90˚ conical DMT Maximum SPL at 1 m (passive) : 121 dB continuous and 127 dB peak Nominal Impedance : 4Ω HF transducer : 45 mm (1.75-inch) and LF transducer : 305 mm (12-inch) driver with 64 mm (2.5-inch) voice coil Dimensions (H×W×D) : 22.5-inch × 15.1-inch × 14.5-inch / 510 × 385 × 370 mm -
QSC AP-5152-WH is a Surface Speaker using Directivity Matched Transition (DMT) Technology, It ensures smooth, coherent power response across the listening plane. Frequency response (-10 dB): 44 Hz - 18 kHz Coverage angle: 75˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 123 dB continuous and 129 dB peak HF transducer: 76 mm (3-inch) voice coil, compression driver; LF transducer: 381 mm (15-inch) driver with 102 mm (4-inch) voice coil Dimensions (H x W x D): 32 × 17.5 × 15.2 in. -
QSC AP-5152-BK is a Surface Speaker using Directivity Matched Transition (DMT) Technology, It ensures smooth, coherent power response across the listening plane. Frequency response (-10 dB): 44 Hz - 18 kHz Coverage angle: 75˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 123 dB continuous and 129 dB peak HF transducer: 76 mm (3-inch) voice coil, compression driver; LF transducer: 381 mm (15-inch) driver with 102 mm (4-inch) voice coil Dimensions (H x W x D): 32 × 17.5 × 15.2 in. -
QSC AP-5122-WH is a Surface Speaker, Using Directivity Matched Transition (DMT) Method ensures smooth, coherent power response across the listening plane. Frequency response (-10 dB): 48 Hz - 18 kHz Coverage angle: 90˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 122 dB continuous and 128 dB peak HF transducer: 76 mm (3-inch) voice coil, compression driver LF transducer: 305 mm (12-inch) driver with 102 mm (4-inch) voice coil Dimensions (HWD): 26 × 15 × 13 in. -
QSC AP-5122-BK is a Surface Speaker, Using Directivity Matched Transition (DMT) Method ensures smooth, coherent power response across the listening plane. Frequency response (-10 dB): 48 Hz - 18 kHz Coverage angle: 90˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 122 dB continuous and 128 dB peak HF transducer: 76 mm (3-inch) voice coil, compression driver LF transducer: 305 mm (12-inch) driver with 102 mm (4-inch) voice coil Dimensions (HWD): 26 × 15 × 13 in. -
QSC Surface Mound Speaker AP-5102-WH White is Directivity Matched Transition (DMT) ensures smooth, coherent power response across the listening plane Frequency response (-10 dB) : 60 Hz - 18 kHz Coverage angle : 105˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 121 dB continuous3 HF transducer: 76 mm (3-inch) voice coil, compression driver LF transducer: 254 mm (10-inch) driver with 76 mm (3-inch) voice coil Dimensions (HWD): 22 × 12 × 10.5 in. -
QSC Surface Mound Speaker AP-5102-BK Black is Directivity Matched Transition (DMT) ensures smooth, coherent power response across the listening plane Frequency response (-10 dB) : 60 Hz - 18 kHz Coverage angle : 105˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 121 dB continuous3 HF transducer: 76 mm (3-inch) voice coil, compression driver LF transducer: 254 mm (10-inch) driver with 76 mm (3-inch) voice coil Dimensions (HWD): 22 × 12 × 10.5 in. -
QSC AD-S282H T-WH is a Contemporary style, weather-resistant enclosure and components - ideal for a wide range of applications. Dual 8-inch, 2-way system - in a lightweight, multipurpose enclosure featuring a heavy duty, powder coated aluminum grill. Frequency Response (-6 dB) : 80 Hz - 27.7 kHz Nominal Impedance : 8 ohms Power Rating Passive : 450 W (IEC 8 hours) Nominal Coverage: 90° H x 60° V (-6 dB) (rotatable to 60° H x 90° V) -
QSC AD-S282H T-BK is a Contemporary style, weather-resistant enclosure and components - ideal for a wide range of applications. Dual 8-inch, 2-way system - in a lightweight, multipurpose enclosure featuring a heavy duty, powder coated aluminum grill. Frequency Response (-6 dB) : 80 Hz - 27.7 kHz Nominal Impedance : 8 ohms Power Rating Passive : 450 W (IEC 8 hours) Nominal Coverage: 90° H x 60° V (-6 dB) (rotatable to 60° H x 90° V) -
QSC AD-C1200BB is design for music playback. It require high output from a ceiling mounted loudspeaker. It designed for trouble free operation and versatility. Frequency Response (-6 dB): 42 Hz – 18 kHz RMS Power Handling: 300 W Nominal Coverage: 85° horizontal and vertical Dimension(W x D x H): 23" x 18" x 15.5" (584 mm x 454 mm x 393 mm) -
QSC CMX 2000Va is a Commercial Power Amplifier. It is an economical and rug power amplifier design to meet the needs of system integrators. QSC CMX 2000Va is based upon the proven, rock-solid, reliable performance found in the award winning RMX Series. Frequency Response: 20 Hz – 20 kHz: ±1 dB -3 dB points: 5 Hz – 50 kHz Stereo Mode: 1100W for 8Ω , 2000W for 4Ω, 2500W for 2Ω, 2500W for 70V DirectDrive, 1000W for 100V DirectDrive Bridge Mono Mode: 3600W for 8Ω, 5000W for 4Ω, 5000W maximum in 70V DirectDrive, 3600W maximum in 100V DirectDrive Dimension(H x W x D): 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears -
QSC CMX 800Va is a Commercial Power Amplifier. It is an economical and rug power amplifier design to meet the needs of system integrators. QSC CMX 800Va is based upon the proven, rock-solid, reliable performance found in the award winning RMX Series. Frequency Response: 20 Hz – 20 kHz: ±1 dB -3 dB points: 5 Hz – 50 kHz Stereo Mode: 500 W for 8Ω , 800 W for 4Ω, 1200W for 2Ω, 400 W for 70V Direct Drive Bridge Mono Mode: 1500W for 8Ω, 2400W for 4Ω, 2000W maximum in 70V DirectDrive, 2300W maximum in 100V DirectDrive Dimension(H x W x D): 3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears -
QSC CMX 500Va is a Commercial Power Amplifier. It is an economical and rug power amplifier design to meet the needs of system integrators. QSC CMX 500Va is based upon the proven, rock-solid, reliable performance found in the award winning RMX Series. Frequency Response: 20 Hz – 20 kHz: ±1 dB -3 dB points: 5 Hz – 50 kHz Stereo Mode: 300 W for 8Ω , 500 W for 4Ω, 700 W for 2Ω Bridge Mono Mode: 900W for 8Ω, 1400W for 4Ω, 1200W maximum in 70V DirectDrive, 600W maximum in 100V DirectDrive Dimension(H x W x D): 3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears -
QSC CMX 300Va is a Commercial Power Amplifier. It is an economical and rug power amplifier design to meet the needs of system integrators. QSC CMX 300Va is based upon the proven, rock-solid, reliable performance found in the award winning RMX Series. Frequency Response: 20 Hz – 20 kHz: ±1 dB -3 dB points: 5 Hz – 50 kHz Stereo Mode: 200 W for 8Ω , 300 W for 4Ω, 430 W for 2Ω Bridge Mono Mode: 600 W for 8Ω, 830 W for 4Ω, 600 W maximum in 70V Direct Drive Dimension(H x W x D): 3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears -
QSC ISA800Ti is a ISA Install 2 Channel Professional Power Amplifier. QSC ISA800Ti designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response(-3 dB): 50 Hz, -0.5 dB at 20 kHz Stereo Mode: 450 W for 8Ω, 650 W for 4Ω, 1200 W for 2Ω Bridge Mono Mode: 1500 W for 8Ω, 2400 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA500Ti is a ISA Install 2 Channel Professional Power Amplifier. It designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response(-3 dB): 50 Hz, -0.5 dB at 20 kHz Stereo Mode: 260 W for 8Ω, 425 W for 4Ω, 700 W for 2Ω Bridge Mono Mode: 900 W for 8Ω, 1400 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA300Ti is a ISA Install 2 Channel Professional Power Amplifier System. And it designed to meet the needs of sound system designers. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response(-3 dB): 50 Hz, -0.5 dB at 20 kHz Stereo Mode: 185 W for 8Ω, 280 W for 4Ω, 430 W 2Ω Bridge Mono Mode: 600 W for 8Ω, 830 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA1350 is a ISA Install System Amplifier. And the design to meet the need of sound system and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response : 20 Hz-20 kHz, +0/-1 dB Stereo Mode: 800 W for 8Ω, 1300 W for 4Ω, 2000W for 2Ω Bridge Mono Mode: 2800 W for 8Ω, 4000 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA750 is a ISA Install 2 Channel Professional Power Amplifier System. It design to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response: 20 Hz-20 kHz, +0/-1 dB Stereo Mode: 450 W for 8Ω, 650 W for 4Ω, 1200 W for 2Ω Bridge Mono Mode: 1500 W for 8Ω, 2400 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA450 is a ISA Install Professional Power Amplifier System. And it designed to meet the needs of sound system designers and contractors worldwide. The ISA Series a rugged, cost-effective power solution for any permanently installed sound system. Frequency Response: 20 Hz-20 kHz, +0/-1 dB Stereo Mode: 260 W for 8Ω, 425 W for 4Ω, 700 W for 2Ω Bridge Mono Mode: 900 W for 8Ω, 1400 W for 4Ω Dimensions (H x W x D): 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA280 is a ISA Install Professional Power Amplifiers System. The design to meet the needs of sound system designers and contractors worldwide. The ISA Series a rugged, cost-effective power solution for any permanently installed sound system. Frequency Response : 20 Hz-20 kHz, +0/-1 dB Stereo Mode: 185 W for 8Ω, 280 W for 4Ω, 430 W for 2Ω Bridge Mono Mode: 600 W for 8Ω, 830 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC CX108V is a 8 Channel Professional Power Amplifiers. And the Power Light technology takes your audio to an entirely new level. Delivering tighter bass and clean, transparent highs, PowerLight also cuts waste heat, boosts reliability, and eliminates unwanted noise and hum. Frequency Response: 20 Hz – 20 kHz, + 0.4 dB | 8 Hz – 70 kHz, +0/-3 dB Mid band Rating: 100 W maximum in 70V Bridge-Mono Mode: 200 W maximum in 140V Dimensions (H x W x D): 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX168 is a 8 Channel Professional Power Amplifier. And the Power Light technology takes your audio to an entirely new level. Delivered tighter bass and clean, transparent highs. Power Light also cuts waste heat, boosts reliability, and eliminate unwanted noise and hum. Frequency Response 20 Hz – 20 kHz, + 0.2 dB | 8 Hz – 50 kHz, +0/-3 dB Stereo Mode: 90 W for 8Ω, 130 W for 4Ω Bridge-Mono Mode: 180 W for 16Ω, 260 W for 8Ω Dimensions (HWD) 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX204V is a 2 Channel Professional Power Amplifier. And the four channels in only two rack spaces, without compromise on power. Each model is equip with exclusive QSC Power Light switching power supply technology to virtually eliminate noise and hum. Frequency Response 20 Hz - 20 kHz, ± 0.2 dB | 8 Hz - 50 kHz, + 0/-3 dB Stereo Mode: 300 W maximum in 70V Bridge-Mono Mode: 600 W maximum in 140V Dimensions (HWD): 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX602V is a 2 Channel Professional Power Amplifier and it is design to meet the specialize need of sound contractors. The QSC Power Light technology with high-output power, versatile loading options, high thermal capacity and unmatched reliability, the CX Series is the perfect solution to any permanently install sound system. Frequency Response: 20 Hz - 20 kHz, ± 0.2 dB Stereo Mode: 550 W for 8Ω, 600 W maximum for 70V Bridge-Mono Mode: 1100 W for 16Ω, 1200 W maximum for 140V Dimensions (H x W x D): 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX404 is a 4 Channel Professional Power Amplifier. It gives four channels in only two rack spaces, without compromising on power. CX404 is equip with exclusive QSC Power Light switching power supply technology to virtually eliminate noise and hum. Frequency Response 20 Hz - 20 kHz, ± 0.2 dB | 8 Hz - 50 kHz, + 0/-3 dB Stereo Mode: 250 W for 8Ω, 400 W for 4Ω (0.1% THD, 1 kHz) Bridge-Mono Mode: 500 W for 16Ω, 800 W for 8Ω (0.1% THD, 1 kHz) Dimensions (H x W x D): 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX254 is a 4 channel Professional Power Amplifier. It gives you four channels in only two rack spaces, without compromising on power. QSC CX254 equipped with exclusive QSC Power Light switching power supply technology to virtually eliminate noise and hum. Frequency Response: 20 Hz - 20 kHz, ± 0.2 dB Stereo Mode: 170 W for 8Ω, 250 W for 4Ω, 450 W for 2Ω Bridge-Mono Mode: 340 W for 16Ω, 500 W for 8Ω, 900 W for 4Ω Dimensions (H x W x D): 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX1202V is a 2 Channel 70V Professional Power Amplifier. It is design to meet the specialized needs of sound contractors. QSC CX1202V, exclusive QSC Power Light technology with high-output power, versatile loading options, high thermal capacity and unmatched reliability. Frequency Response: 20 Hz - 20 kHz, ± 0.2 dB Stereo Mode: 700 W for 8Ω, 1100 W for 4Ω and 1200 W maximum in 70V Bridge-Mono Mode: 1400 W for 16Ω, 2200 W for 8Ω and 2400 W maximum in 140V Dimensions (H x W x D): 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX1102 is a 2 Channel Professional Power Amplifier is design to meet the specialized needs of sound contractors. QSC CX1102, exclusive QSC Power Light technology with high-output power, versatile loading options, high thermal capacity and unmatched reliability. Frequency Response: 20 Hz - 20 kHz, ± 0.2 dB Stereo Mode: 700 W for 8Ω, 1100 W for 4Ω, 1700 W for 2Ω and 1200 W maximum in 70V Bridge-Mono Mode: 1400 W for 16Ω, 2200 W for 8Ω, 3400 W for 4Ω and 2400 W maximum in 140V Dimensions (H x W x D): 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX108V is a 8 Channel Professional Power Amplifier design for permanent install sound systems. The rack space is at premium, and it provide unprecedented levels of channel density for multichannel amplifiers. Frequency Response: 20 Hz – 20 kHz, + 0.4 dB | 8 Hz – 70 kHz, +0/-3 dB 100 watts per channel at 70 volts in Stereo Mode 200 watts per channel at 140 volts in Bridge Mono Mode Dimensions (H x W x D): 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX204V 4-channel 70V professional power amplifiers give you four channels in only two rack spaces, without compromising on power. And equipped with exclusive QSC Power Light switching power supply technology to virtually eliminate noise and hum. Frequency Response 20 Hz - 20 kHz, ± 0.2 dB | 8 Hz - 50 kHz, + 0/-3 dB HD15 DataPort connector for QSControl computer control 1-dB detented gain controls for fast and accurate gain settings Dimensions (HWD) 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX902 is a 2 channel Low-Z Power Amplifier. Exclusive Power Light switch-mode power supply technology for high performance and compact size. QSC CX902 in the Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers. XLR and detachable Euro style input connectors. Frequency Response: 20 Hz–20 kHz, ±0.2 dB Stereo Mode: 550 W for 8 Ω, 900 W for 4 Ω, 1500 W for 2Ω, 400 W for 70V / 20 Hz – 20 kHz, 440 W for 70V / 1 kHz, 600 W for 70V / 1 kHz Bridged Mono Mode: 1100 W for 16Ω, 2000 W for 8Ω, 3000 W for 4Ω, 800 W for 140V / 20 Hz – 20 kHz, 880 W for 140V / 1 kHz / 0.05% THD,1200 W for 140V / 1 kHz / 1% THD Dimensions (H x W x D): 3.5" x 19" x 14"(89 mm x 483 mm x 356 mm) -
QSC CX702 is a 2 channel Low-Z Power Amplifier. Exclusive Power Light switch-mode power supply technology for high performance and compact size. QSC CX702 in the Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers. XLR and detachable Euro style input connectors. Frequency Response: 20 Hz–20 kHz, ±0.2 dB Stereo Mode: 425 W for 8 Ω, 700 W for 4 Ω and 1200 W for 2Ω Bridged Mono Mode: 850 W for 16Ω, 1500 W for 8Ω and 2400 W for 4Ω Dimensions (H x W x D): 3.5" x 19" x 14"(89 mm x 483 mm x 356 mm)
شركة أي تراست للأنظمة
شركة أي تراست للأنظمة
دبي – الخليج التجاري – باي سكوير – قسم المشاريع الرجاء التواصل للمواعيد 0556693323
عجمان – الحميدية – اللوجيستيك والعمليات – للدعم الفني الواتس اس على الرقم 0566990926
الايميل info@itrustsystems.com
اشترك في النشرة الإخبارية المجانية
© 2024 | I-Trust Systems | كل الحقوق محفوظة | شروط الخدمة | سياسة الاسترجاع