-
Frequency Response (±3 dB) : 80 Hz - 20 kHz Frequency Range (-10 dB) : 68 Hz - 22 kHz Nominal Impedance : HF: 16Ω, LF bi amp mode: 8Ω and LF tri amp mode: 16Ω (×2) Maximum Output (dB SPL at 1 m) Continuous / Peak : HF : 126 dB / 132 dB and LF : 122 dB / 128 dB Nominal Coverage : Horizontal 140 degrees and Vertical: dependent on number of elements used Dimensions (HWD) inches : 11.8 x 27 x 13.4 -
QSC WL118-sw-BK is a Subwoofer Transducers Low Frequency : 850 W, 8Ω 18-inch woofer with a 4-inch voice coil, ceramic magnet assembly Frequency Response (±3 dB) : 32 Hz - 200 Hz Frequency Range (-10 dB) : 29 Hz - 800 Hz Nominal Impedance : 8Ω Continuous Power Capacity : LF: 850 W Dimensions (HWD) inches : 22.1 x 27.6 x 30.3 in -
QSC AP-212sw is a folded baffle subwoofer using Directivity Matched Transition (DMT) in 2-way models ensures smooth, coherent power response across the listening plane. Frequency response : 35 Hz - 250 Hz Maximum SPL at 1 m (passive) : 122 dB continuous and 128 dB peak Rated Impedance : 4Ω LF transducer : Two 305 mm (12-inch) weather resistant cone woofers with 64 mm (2.5 in) voice coil Dimensions (H×W×D) : 26" × 15" × 24" / 660 × 381 × 610 mm -
QSC AP-4122m is a Coaxial Multipurpose Speaker using Directivity Matched Transition (DMT) in 2-way models ensures smooth, coherent power response across the listening plane. Frequency response (-10 dB) : 55 Hz - 20 kHz Coverage angle : 90˚ conical DMT Maximum SPL at 1 m (passive) : 121 dB continuous and 127 dB peak Nominal Impedance : 4Ω HF transducer : 45 mm (1.75-inch) and LF transducer : 305 mm (12-inch) driver with 64 mm (2.5-inch) voice coil Dimensions (H×W×D) : 22.5-inch × 15.1-inch × 14.5-inch / 510 × 385 × 370 mm -
QSC AP-5152-WH is a Surface Speaker using Directivity Matched Transition (DMT) Technology, It ensures smooth, coherent power response across the listening plane. Frequency response (-10 dB): 44 Hz - 18 kHz Coverage angle: 75˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 123 dB continuous and 129 dB peak HF transducer: 76 mm (3-inch) voice coil, compression driver; LF transducer: 381 mm (15-inch) driver with 102 mm (4-inch) voice coil Dimensions (H x W x D): 32 × 17.5 × 15.2 in. -
QSC AP-5152-BK is a Surface Speaker using Directivity Matched Transition (DMT) Technology, It ensures smooth, coherent power response across the listening plane. Frequency response (-10 dB): 44 Hz - 18 kHz Coverage angle: 75˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 123 dB continuous and 129 dB peak HF transducer: 76 mm (3-inch) voice coil, compression driver; LF transducer: 381 mm (15-inch) driver with 102 mm (4-inch) voice coil Dimensions (H x W x D): 32 × 17.5 × 15.2 in. -
QSC AP-5122-WH is a Surface Speaker, Using Directivity Matched Transition (DMT) Method ensures smooth, coherent power response across the listening plane. Frequency response (-10 dB): 48 Hz - 18 kHz Coverage angle: 90˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 122 dB continuous and 128 dB peak HF transducer: 76 mm (3-inch) voice coil, compression driver LF transducer: 305 mm (12-inch) driver with 102 mm (4-inch) voice coil Dimensions (HWD): 26 × 15 × 13 in. -
QSC AP-5122-BK is a Surface Speaker, Using Directivity Matched Transition (DMT) Method ensures smooth, coherent power response across the listening plane. Frequency response (-10 dB): 48 Hz - 18 kHz Coverage angle: 90˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 122 dB continuous and 128 dB peak HF transducer: 76 mm (3-inch) voice coil, compression driver LF transducer: 305 mm (12-inch) driver with 102 mm (4-inch) voice coil Dimensions (HWD): 26 × 15 × 13 in. -
QSC Surface Mound Speaker AP-5102-WH White is Directivity Matched Transition (DMT) ensures smooth, coherent power response across the listening plane Frequency response (-10 dB) : 60 Hz - 18 kHz Coverage angle : 105˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 121 dB continuous3 HF transducer: 76 mm (3-inch) voice coil, compression driver LF transducer: 254 mm (10-inch) driver with 76 mm (3-inch) voice coil Dimensions (HWD): 22 × 12 × 10.5 in. -
QSC Surface Mound Speaker AP-5102-BK Black is Directivity Matched Transition (DMT) ensures smooth, coherent power response across the listening plane Frequency response (-10 dB) : 60 Hz - 18 kHz Coverage angle : 105˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 121 dB continuous3 HF transducer: 76 mm (3-inch) voice coil, compression driver LF transducer: 254 mm (10-inch) driver with 76 mm (3-inch) voice coil Dimensions (HWD): 22 × 12 × 10.5 in. -
QSC AD-S282H T-WH is a Contemporary style, weather-resistant enclosure and components - ideal for a wide range of applications. Dual 8-inch, 2-way system - in a lightweight, multipurpose enclosure featuring a heavy duty, powder coated aluminum grill. Frequency Response (-6 dB) : 80 Hz - 27.7 kHz Nominal Impedance : 8 ohms Power Rating Passive : 450 W (IEC 8 hours) Nominal Coverage: 90° H x 60° V (-6 dB) (rotatable to 60° H x 90° V) -
QSC AD-S282H T-BK is a Contemporary style, weather-resistant enclosure and components - ideal for a wide range of applications. Dual 8-inch, 2-way system - in a lightweight, multipurpose enclosure featuring a heavy duty, powder coated aluminum grill. Frequency Response (-6 dB) : 80 Hz - 27.7 kHz Nominal Impedance : 8 ohms Power Rating Passive : 450 W (IEC 8 hours) Nominal Coverage: 90° H x 60° V (-6 dB) (rotatable to 60° H x 90° V) -
QSC AD-C1200BB is design for music playback. It require high output from a ceiling mounted loudspeaker. It designed for trouble free operation and versatility. Frequency Response (-6 dB): 42 Hz – 18 kHz RMS Power Handling: 300 W Nominal Coverage: 85° horizontal and vertical Dimension(W x D x H): 23" x 18" x 15.5" (584 mm x 454 mm x 393 mm) -
QSC CMX 2000Va is a Commercial Power Amplifier. It is an economical and rug power amplifier design to meet the needs of system integrators. QSC CMX 2000Va is based upon the proven, rock-solid, reliable performance found in the award winning RMX Series. Frequency Response: 20 Hz – 20 kHz: ±1 dB -3 dB points: 5 Hz – 50 kHz Stereo Mode: 1100W for 8Ω , 2000W for 4Ω, 2500W for 2Ω, 2500W for 70V DirectDrive, 1000W for 100V DirectDrive Bridge Mono Mode: 3600W for 8Ω, 5000W for 4Ω, 5000W maximum in 70V DirectDrive, 3600W maximum in 100V DirectDrive Dimension(H x W x D): 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears -
QSC CMX 800Va is a Commercial Power Amplifier. It is an economical and rug power amplifier design to meet the needs of system integrators. QSC CMX 800Va is based upon the proven, rock-solid, reliable performance found in the award winning RMX Series. Frequency Response: 20 Hz – 20 kHz: ±1 dB -3 dB points: 5 Hz – 50 kHz Stereo Mode: 500 W for 8Ω , 800 W for 4Ω, 1200W for 2Ω, 400 W for 70V Direct Drive Bridge Mono Mode: 1500W for 8Ω, 2400W for 4Ω, 2000W maximum in 70V DirectDrive, 2300W maximum in 100V DirectDrive Dimension(H x W x D): 3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears -
QSC CMX 500Va is a Commercial Power Amplifier. It is an economical and rug power amplifier design to meet the needs of system integrators. QSC CMX 500Va is based upon the proven, rock-solid, reliable performance found in the award winning RMX Series. Frequency Response: 20 Hz – 20 kHz: ±1 dB -3 dB points: 5 Hz – 50 kHz Stereo Mode: 300 W for 8Ω , 500 W for 4Ω, 700 W for 2Ω Bridge Mono Mode: 900W for 8Ω, 1400W for 4Ω, 1200W maximum in 70V DirectDrive, 600W maximum in 100V DirectDrive Dimension(H x W x D): 3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears -
QSC CMX 300Va is a Commercial Power Amplifier. It is an economical and rug power amplifier design to meet the needs of system integrators. QSC CMX 300Va is based upon the proven, rock-solid, reliable performance found in the award winning RMX Series. Frequency Response: 20 Hz – 20 kHz: ±1 dB -3 dB points: 5 Hz – 50 kHz Stereo Mode: 200 W for 8Ω , 300 W for 4Ω, 430 W for 2Ω Bridge Mono Mode: 600 W for 8Ω, 830 W for 4Ω, 600 W maximum in 70V Direct Drive Dimension(H x W x D): 3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears -
QSC ISA800Ti is a ISA Install 2 Channel Professional Power Amplifier. QSC ISA800Ti designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response(-3 dB): 50 Hz, -0.5 dB at 20 kHz Stereo Mode: 450 W for 8Ω, 650 W for 4Ω, 1200 W for 2Ω Bridge Mono Mode: 1500 W for 8Ω, 2400 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA500Ti is a ISA Install 2 Channel Professional Power Amplifier. It designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response(-3 dB): 50 Hz, -0.5 dB at 20 kHz Stereo Mode: 260 W for 8Ω, 425 W for 4Ω, 700 W for 2Ω Bridge Mono Mode: 900 W for 8Ω, 1400 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA300Ti is a ISA Install 2 Channel Professional Power Amplifier System. And it designed to meet the needs of sound system designers. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response(-3 dB): 50 Hz, -0.5 dB at 20 kHz Stereo Mode: 185 W for 8Ω, 280 W for 4Ω, 430 W 2Ω Bridge Mono Mode: 600 W for 8Ω, 830 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA1350 is a ISA Install System Amplifier. And the design to meet the need of sound system and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response : 20 Hz-20 kHz, +0/-1 dB Stereo Mode: 800 W for 8Ω, 1300 W for 4Ω, 2000W for 2Ω Bridge Mono Mode: 2800 W for 8Ω, 4000 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA750 is a ISA Install 2 Channel Professional Power Amplifier System. It design to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response: 20 Hz-20 kHz, +0/-1 dB Stereo Mode: 450 W for 8Ω, 650 W for 4Ω, 1200 W for 2Ω Bridge Mono Mode: 1500 W for 8Ω, 2400 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA450 is a ISA Install Professional Power Amplifier System. And it designed to meet the needs of sound system designers and contractors worldwide. The ISA Series a rugged, cost-effective power solution for any permanently installed sound system. Frequency Response: 20 Hz-20 kHz, +0/-1 dB Stereo Mode: 260 W for 8Ω, 425 W for 4Ω, 700 W for 2Ω Bridge Mono Mode: 900 W for 8Ω, 1400 W for 4Ω Dimensions (H x W x D): 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA280 is a ISA Install Professional Power Amplifiers System. The design to meet the needs of sound system designers and contractors worldwide. The ISA Series a rugged, cost-effective power solution for any permanently installed sound system. Frequency Response : 20 Hz-20 kHz, +0/-1 dB Stereo Mode: 185 W for 8Ω, 280 W for 4Ω, 430 W for 2Ω Bridge Mono Mode: 600 W for 8Ω, 830 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails
شركة أي تراست للأنظمة
شركة أي تراست للأنظمة
دبي – الخليج التجاري – باي سكوير – قسم المشاريع الرجاء التواصل للمواعيد 0556693323
عجمان – الحميدية – اللوجيستيك والعمليات – للدعم الفني الواتس اس على الرقم 0566990926
الايميل info@itrustsystems.com
اشترك في النشرة الإخبارية المجانية
© 2024 | I-Trust Systems | كل الحقوق محفوظة | شروط الخدمة | سياسة الاسترجاع