-
RCF BM 3003 paging microphone allows to make selective calls to 3 zones and is the ideal complement of the mixer amplifier. The inputs 2 and 3 of the RCF BM 3003 amplifier have a RJ 45 port to connect a paging microphone quickly and directly. The paging microphones by using 1 or more additional power supply units. FREQUENCY RESPONSE: (-3dB): 50 Hz ÷ 18 kHz IT CAN BE DIRECTLY CONNECTED TO AMPLIFIERS PRODUCT DIMENSION(W x D x H): 100 mm/3.94 in x 159 mm/6.26 in x 48 mm/1.89 in -
RCF PX 2106 wireless microphone series has 16 individual channels. The channels are selected manually at the transmitter and receiver. The system can work with up to 6 channels at the same time. It automatically selects the highest-level radio signal that is received from one of the two antennas.FREQUENCY RESPONCE (-3DB): 50 Hz ÷ 50 kHz16 DIFFERENT FREQUENCIES HANDLE PRODUCT DIMENSION(W x D x H): 201 mm/7.91 in x 130 mm/5.12 in x 44 mm/1.73 in -
RCF AM 2080 is a mixer-amplifiers with 2 mic-line audio inputs on removable connectors and 2 aux inputs for music sources. The nominal power: is a 80 W amplifier. The amplifier output is available either for low impedance loudspeakers or 100 – 70 V constant voltage line. POWER OUTPUT (HI-Z): 80 W RMS FREQUENCY RESPONSE (-3DB): 50 Hz ÷ 16 kHz SIGNAL OUTPUT: 2 x RCA PRODUCT DIMENSION(W x D x H): 442 mm/17.4 in x 230 mm/9.06 in x 88 mm/3.46 in -
It is a multipurpose two-way full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make the speaker suitable for almost any environment and architectural constraint. POWER HANDLING: 80 W RMS AND 320 W PEAK FREQUENCY RESPONSE (-10DB): 80 Hz ÷ 20000 Hz 5.5" WOOFER, 1.2" v.c AND 1.0" COMPRESSION DRIVER, 1.0" v.c COVERAGE ANGLE: HORIZONTAL 90° AND VERTICAL 90° PRODUCT DIMENSION(W x D x H): 175 mm/6.89 in x 185 mm/7.28 in x 303 mm/11.93 in -
The BM 7608D model is a desktop emergency console with microphone dedicated exclusively to the voice alarm system of the DXT 7000 main unit. It can be used for both live announcements and the activation of pre-recorded messages. It offers complete self-diagnosis functions and status information in compliance with the EN 54-16 standard. Up to 8 consoles can be chained on each paging bus, for a total of 32 consoles. -
The BM 7608 model is a desktop emergency console with microphone dedicated exclusively to the voice alarm system of the DXT 7000 main unit. It can be used for both live announcements and the activation of pre-recorded messages. It offers complete self-diagnosis functions and status information in compliance with the EN 54-16 standard -
MT 7308 is a power amplifiers manager unit of the DXT 7000 Voice Alarm system, suitable to control up to 8 additional power amplifiers and several speaker lines, according to EN 54-16 norm. It works connected to the MU 7100EN master unit. When speaker lines drive high power loads, it could be convenient to optimize the system configuration by using one or more dedicated power amplifiers dimensioned according the loads involved. -
The LT7208EN unit has 8 internal transformers (80 W / each) to convert the 8 Ohm loudspeaker outputs of the MU 7100 central unit into constant voltage lines (100 – 70 – 50 V) for loudspeakers having transformers. The possible combinations are 8 x 80W, 4 x 160 W and 2 x 320W (or any combination from these). -
The RCF TTL 36-AS is the ideal flyable bass complement for the TTL55-A array system. The clam-shell design guarantees the maximum output per size while the 2 x 4.5” voice coil vented 18” woofer design offers the minimum of power compression. The TTL36-AS is perfect to create flown systems for theatrical and indoor requirements. For very large outdoor systems is the perfect complement to reinforce the TTL55-A bass performance in combination with the ultra-powerful TTS56-A subwoofers. 4000 Watt (2 x 2000 W digital switching amplifiers) 2 x 18″ high power neodymium woofer, 4.5″ v. c. 96 Khz, 32 bit DSP processing -
RCF TTS56-A is a high-power, high-output active subwoofer system that sets a new standard in the touring sound reinforcement. The 21" neodymium design represents the result of many years dedicated in pioneering new solutions for the transducers technology. The integration of the 6800 W, 2-channel digital amplification and the advanced digital processing set a new standard for distortion, noise and thermal efficiency. 2x 3400 W digital amplifiers 2x 21" high power neodymium woofers 96kHz, 32-bit DSP processing -
The RCF TTP5-A is a high power two way amplification active array module. Engineered to deliver high fidelity output for use in indoor and outdoor medium and large spaces. The system is designed to create horizontal or vertical arrays with a constant curvature. The system is designed to be used for medium-small theatres to very large outdoor stadia and public spaces. The integration of two channels 1600 Watt digital amplification and the advanced digital processing set a new standard for distortion, noise and thermal efficiency. -
The TTL6-AS is a high power line source active bass module designed to provide high output level indoors and outdoors for medium to large venues. The TTL 6-AS is the ideal bass module for the TTL6-A, extending the frequency range of the suspended system and improving the bass output level. The TTL6-AS module is equipped with 3 x 12" low frequency woofers in a bass reflex configuration. The integration of three channels of digital amplification and advanced digital processing set a new standard for distortion, noise and thermal efficiency. 3 Class D amplifiers, 1650 Watt total power Premium quality DSP with optimized phase response 3x 12'' compression driver 139 dB max SPL
شركة أي تراست للأنظمة
شركة أي تراست للأنظمة
دبي – الخليج التجاري – باي سكوير – قسم المشاريع الرجاء التواصل للمواعيد 0556693323
عجمان – الحميدية – اللوجيستيك والعمليات – للدعم الفني الواتس اس على الرقم 0566990926
الايميل info@itrustsystems.com
اشترك في النشرة الإخبارية المجانية
© 2024 | I-Trust Systems | كل الحقوق محفوظة | شروط الخدمة | سياسة الاسترجاع