-
The NS-SW700 subwoofer meets the challenge of providing an ideal balance between tight sounds (with crisp, fast attack) and deep sounds (with a spacious feeling). Although these two types of sounds, by definition, tend to oppose each other, this subwoofer is capable of accurately rendering the tone intervals of all kinds of sounds, so the music is ideally balanced. Finally, the enjoyment derived from the NS-SW700 is not restricted to your ears — with it's impressive power it lets you feel the music.
-
Benq EH600 is a Wireless Android-based Smart Projector, Convenience made easier through wireless connections, built-in business apps, and over-the-air firmware updates. Wireless projection & mirroring capabilities across various platforms (Mac/iOS, Android, or PC) for simple and easy presentations. Wireless projector with internet connectivity and USB reading to easily show your ideas during huddle sessions.
-
The speakers boosts the performance with a series of brand new transducers, improves the sound quality with the revolutionary FiRPHASE processing and renew the grille design to exalt the professional look. The vocals are natural, the sound is clear at long distances, the SPL power is stable at very high levels. TOTAL POWER: 1400 W Peak, 700 W RMS FREQUENCY RESPONSE: 45 Hz ÷ 20000 Hz 12" WOOFER, 2.5" v.c AND 1.0" COMPRESSION DRIVER, 1.5" v.c COVERAGE ANGLE: HORIZONTAL 90° AND VERTICAL 60° PRODUCT DIMENSION(W x D x H):380 mm/14.96 in x 380 mm/14.96 in x 647 mm/25.47 in
-
The speaker is a full range extremely versatile wide-dispersion, low profile, two-way loudspeaker system for near field applications. Its compact size makes it ideal for low visibility side wall mounting. POWER HANDLING: 300 W RMS AND 1200 W PEAK FREQUENCY RESPONSE (-10DB): 70 Hz ÷ 20000 Hz COVERAGE ANGLE: HORIZONTAL 90° AND VERTICAL 60° 8" WOOFER, 2.0" v.c AND 1.0" COMPRESSION DRIVER, 1.5" v.c PRODUCT DIMENSION(W x D x H): 242 mm/9.53 in x 263 mm/10.35 in x 427 mm/16.81 in
-
The Speaker is a full range extremely versatile wide-dispersion, low profile, two-way loudspeaker system for near field applications. Its compact size makes it ideal for low visibility side wall mounting. POWER HANDLING: 300 W RMS AND 1200 W PEAK FREQUENCY RESPONSE (-10DB): 70 Hz ÷ 20000 Hz COVERAGE ANGLE: HORIZONTAL 120° AND VERTICAL 60° 8" WOOFER, 2.0" v.c AND 1.0" COMPRESSION DRIVER, 1.5" v.c PRODUCT DIMENSION(W x D x H): 242 mm/9.53 in x 263 mm/10.35 in x 427 mm/16.81 in
-
It is a portable compact size sound reinforcement system. It combines the quality and reliability of RCF transducers with a very high amplification power. The system is designed to be the perfect portable solution for live music and DJs. The perfect tool for presentations, corporate events and congresses. TOTAL POWER: 800 W Peak, 400 W RMS FREQUENCY RESPONSE: 45 Hz ÷ 20000 Hz 10" WOOFER, 2.0" v.c AND 5 x 2.0" FULLRANGE TRANSDUCER, 1.0" v.c COVERAGE ANGLE: HORIZONTAL 120° AND VERTICAL 30° PRODUCT DIMENSION(W x D x H): 490 mm/19.29 in x 288 mm/11.34 in x 427 mm/16.81 in
-
JBL LSR705i model can answer the call for next generation multi-channel monitoring in post rooms, broadcast facilities and trucks. Leveraging patented technologies. Frequency Response(±3 dB): 48 Hz – 23 kHz Frequency Range: 39Hz – 36 kHz Maximum Continuous SPL: (80 Hz - 20 kHz) >101 dB SPL / 1m Maximum Peak SPL: (80 Hz - 20 kHz) >107 dB SPL / 1m HF Driver: 2409H and LF Driver: 725G - 5in (127mm) Dimensions(H x W x D): 10.5 x 5.875 x 8.125 in (267 x 149 x 206 mm)
-
JBL Control 322CT delivers exceptional next-generation performance in a coaxial point source design ceiling loudspeaker. Frequency Range: (-10dB): 32 Hz – 20 kHz and (±3 dB): 48 Hz – 19 kHz Transformer Taps: 100W, 50W, 25W (& 12.5W @ 70V) Sensitivity: 95 dB (1 kHz - 16 kHz) Maximum SPL (1m): 121 dB (top 70V/100V tap) Coverage Angle: 90° conical, constant directivity Drivers: LF Driver: 300 mm (12 in) and HF Driver: compression driver, 37 mm (1.5 inch) coil Dimensions (H x W x D) : 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 240 mm (9.5 in)
-
The V6 is a very compact, full range, extremely versatile two-way loudspeaker system. It offers substantial output and efficiency for a variety of professional applications that include portable systems, small sound reinforcement, permanent installations and supplementary fill for larger systems. POWER HANDLING: 200 W RMS AND 800 W PEAK FREQUENCY RESPONSE (-10DB): 60 Hz ÷ 20000 Hz 6.0" WOOFER, 1.7" v.c AND 1.0" COMPRESSION DRIVER, 1.75" v.c COVERAGE ANGLE: HORIZONTAL 90° AND VERTICAL 60° PRODUCT DIMENTION(W x D x H): 224 mm/8.82 in x 272 mm/10.71 in x 394 mm/15.51 in
-
RCF E 16 provides twelve studio-quality 54 dB gain range Mic preamps with combo connectors. Two line inputs are switchable to Hi-Z input. The input section also features two stereo line inputs and a stereo return. Input channels from 1 to 6 are equipped with a single-control compressor.FREQUENCY RESPONSE: 20 Hz ÷ 20 kHzPRODUCT DIMENSION(W x D x H): 510 mm/20.08 in x 550 mm/21.65 in x 135 mm/5.31 in
-
JBL EON208P/230 all-in-one portable PA system, complete with an 8-channel mixer, Bluetooth audio and included AKG microphone. Maximum SPL Output: 121 dB peak Frequency Range: (-10dB) 60 Hz - 20 kHz System Power Rating: 300 W (2x 150 W stereo) Drivers: LF Driver: 1x JBL 8" (203mm) woofer and HF Driver: 1x 1" Neodymuim black aluminum dome tweeter Coverage Pattern: 100° horizontal x 60° vertical Dimensions (H x W x D): 575mm x 775mm x 400mm (22.6in x 30.5in x 15.7in)
-
The JBL NCSA2300Z-34-EU Dual-Channel 300W Amplifier from JBL delivers powerful sound and efficient performance. this amplifier provides a DriveCore-based sound solution, which utilizes one small chip that significantly reduces the part count and increases reliability while still maintaining high performance. It provides amplification with a choice of the low impedance, 70V or 100V outputs. The amp includes a rack mounting kit for installations to a cabinet and an RJ45 connector for an optional remote volume control using JBL's CSR-V control module.
-
The JBL NCSA2300Z-34-UK Dual-Channel 300W Amplifier from JBL delivers powerful sound and efficient performance,this amplifier provides a DriveCore-based sound solution, which utilizes one small chip that significantly reduces the part count and increases reliability while still maintaining high performance. It provides amplification with a choice of the low impedance, 70V or 100V outputs. The amp includes a rack mounting kit for installations to a cabinet and an RJ45 connector for an optional remote volume control using JBL's CSR-V control module.
-
It changes everything. Engineered for music reinforcement applications, these unobtrusive, easy-to-install loudspeakers feature a transformer-less design for 70V/100V distributed-line systems with two wattage settings. POWER HANDLING2 150W (27V) continuously FREQUENCY RESPONSE 50-130 Hz +/- 4 dB TRANSDUCERS 8" Woofer AND 8' Drone NOMINAL IMPEDANCE 6 ohms, min 4.9 ohms, switch set to mono or stereo position DIAMETER 14.125" and CUTOUT DIAMETER 14.25"
-
QSC CMX 500Va is a Commercial Power Amplifier. It is an economical and rug power amplifier design to meet the needs of system integrators. QSC CMX 500Va is based upon the proven, rock-solid, reliable performance found in the award winning RMX Series. Frequency Response: 20 Hz – 20 kHz: ±1 dB -3 dB points: 5 Hz – 50 kHz Stereo Mode: 300 W for 8Ω , 500 W for 4Ω, 700 W for 2Ω Bridge Mono Mode: 900W for 8Ω, 1400W for 4Ω, 1200W maximum in 70V DirectDrive, 600W maximum in 100V DirectDrive Dimension(H x W x D): 3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears
-
The lifelike rock design provides the volume necessary for low extension and high output while remaining hidden in its environment. Enjoy a superior listening experience while maintaining a high end, modern look in today’s finest landscapes and outdoor living spaces. POWER HANDLING 200W FREQUENCY RANGE 40Hz - 112Hz +/- 6dB Front-Firing WOOFER 10" (25.4cm) IMG Dual Voice Coil IMPEDANCE 8 Ohm Stereo and 4 Ohm Mono PRODUCT DIMENSIONS 13.39” x 18.43” x 20.67” (340mm x 468mm x 525mm)
-
The lifelike rock design provides the volume necessary for low extension and high output while remaining hidden in its environment. Enjoy a superior listening experience while maintaining a high end, modern look in today’s finest landscapes and outdoor living spaces. POWER HANDLING 200W FREQUENCY RANGE 40Hz - 112Hz +/- 6dB Front-Firing WOOFER 10" (25.4cm) IMG Dual Voice Coil IMPEDANCE 8 Ohm Stereo and 4 Ohm Mono PRODUCT DIMENSIONS 13.39” x 18.43” x 20.67” (340mm x 468mm x 525mm)
-
JBL CSMA 1120 is Designed for commercial and industrial use, the CSMA 1120 Commercial Series Mixer/Amplifier from JBL is a mixer/amplifier with four mixer-channel inputs and one output channel. It's capable of reaching 120W of peak power with 15W per channel. The unit's front panel sports volume controls for each channel, as well as a master volume adjustment knob, bass, and treble controls, and a power switch. The volume controls are illuminated so they can be seen and operated in darkened environments.
-
The 502-L-THX delivers effortless dynamic range and brings superior sound to larger areas thanks to its highly regarded THX Select2 certification. It not only delivers consistent compelling audio to larger-sized rooms, it also brings real cinema sound to the comforts of home without taking up any floor space.
-
JBL AC25 is a High output, 2-way loudspeaker systems combining flexibility with high fidelity. Frequency Response: (-10dB): 80 Hz -20 kHz and (±3 dB): 90 Hz -18 kHz Impedance: 16 ohms Coverage Pattern: 90° x 90° Maximum SPL (1m): 115 dB Dimensions (H x W x D): 377.8 x 150.3 x 177.8mm (14.9 x 5.9 x 7.0in) Drivers: LF Driver: 2 x JBL 225H, 135 mm (5.25 in) and HF Driver: 1 x JBL 201J, 25mm (1 in)
-
JBL AC25-WH is a High output, 2-way loudspeaker systems combining flexibility with high fidelity. Frequency Response: (-10dB): 80 Hz -20 kHz and (±3 dB): 90 Hz -18 kHz Impedance: 16 ohms Coverage Pattern: 90° x 90° Maximum SPL (1m): 115 dB Dimensions (H x W x D): 377.8 x 150.3 x 177.8mm (14.9 x 5.9 x 7.0in) Drivers: LF Driver: 2 x JBL 225H, 135 mm (5.25 in) and HF Driver: 1 x JBL 201J, 25mm (1 in)
-
RCF HPS 1500 is a 2 channel power amplifier that delivers up to 2 x 750 W RMS @ 4 O. XLR inputs for patching in signals as well as Speak on ports for connecting speaker systems are provided for the maximum flexibility. A forced air cooling system maintains a low operating temperature.POWER OUTPUT (BRIDGED @ 8 OHM): 1500 W RMSFREQUENCY RESPONSE (-3DB): 20 Hz ÷ 20 kHzCONNECTORS: 1 x XLR SIGNAL OUTPUT AND 1 x Speak on POWER OUTPUTPRODUCT DIMENSION(W x D x H): 482 mm/18.98 in x 420 mm/16.54 in x 88 mm/3.46 in
-
QSC AD-C820 R is acoustically identical and design for music playback. It require high output from a ceiling mounted loudspeaker. It designed for trouble free operations and versatility. Frequency Response (-6 dB): 61 Hz – 18 kHz RMS Power Handling: 200 W 8" (203 mm) ferrite woofer and 1.4" (36 mm) neodymium compression driver Product Diameter: 14.9" (379 mm) and Depth: 8.3" (211 mm)
-
QSC AD-C820 S is acoustically identical and design for music playback. It is a distributed audio in applications and it require high output from a ceiling mounted loudspeaker. It designed for trouble free operations and versatility. Frequency Response (-6 dB): 61 Hz – 18 kHz RMS Power Handling: 200 W 8" (203 mm) ferrite woofer and 1.4" (36 mm) neodymium compression driver Product Diameter: 14.9" (379 mm) and Depth: 8.3" (211 mm)
-
QSC AD-C1200 is design for music playback. It require high output from a ceiling mounted loudspeaker. It designed for trouble free operation and versatility. Frequency Response (-6 dB): 42 Hz – 18 kHz RMS Power Handling: 300 W Nominal Coverage: 85° horizontal and vertical Dimension(W x D x H): 23" x 18" x 15.5" (584 mm x 454 mm x 393 mm)
-
QSC AD-S10T Black Acoustic Design surface mount loudspeaker is a professional, 70/100V, 10" two-way, full range system. And it ideal for a wide variety of foreground and background sound reinforcement applications. Effective frequency range: 50 – 19k Hz Rated noise power / voltage: 250 watts / 45 volts (rms) Coverage angle (-6 dB): 90° LF transducer: 10” weather resistant paper cone woofer Product dimensions: 20.3” x 12.5” x 11.7” (516 x 318 x 298mm)
-
QSC AD-S10T White Acoustic Design surface mount loudspeaker is a professional, 70/100V, 10" two-way, full range system. And it ideal for a wide variety of foreground and background sound reinforcement applications. Effective frequency range: 50 – 19k Hz Rated noise power / voltage: 250 watts / 45 volts (rms) Coverage angle (-6 dB): 90° LF transducer: 10” weather resistant paper cone woofer Product dimensions: 20.3” x 12.5” x 11.7” (516 x 318 x 298mm)