• JBL CBT1000E Extension provides extended bass response, extended pattern control, and increased sound output levels. Frequency Range (-10 dB): 38 Hz – 650 Hz Nominal Impedance: 8 ohms Drivers: Six (6) 165 mm (6.5 in) LF drivers Max SPL: 124 dB full space, 130 dB half-space (65 Hz – 300 Hz) Sensitivity (2.83V@ 1m): 92 dB full space, 98 dB half-space (65 Hz – 300 Hz) Power Capacity: 1500 W (6000 W peak), 2 hrs ; 1000 W (4000 W peak), 100 hrs
  • JBL CBT1000 represents the next-generation in pattern control consistency utilizing adjustable vertical coverage and a tapered horizontal waveguide. Frequency Range (-10dB): 45 Hz – 20 kHz Low Frequency Drivers: 6 pcs, 165 mm (6.5 in) drivers Impedance: 4 ohms (4 ohms above 1 kHz; 8 ohms below 800 Hz) Power Rating: 1500 W (6000 W peak), 2 hrs; 1000 W (4000 W peak), 100 hrs Dimensions (H x W x D): 1020 mm x 250 mm x 345 mm (40.2 x 9.9 x 13.6 in) Horizontal Coverage: 100°, Middle section: 130°, Short-throw (bottom) section: 160° Maximum SPL (1m): 131 dB continuous average pink noise, 134 dB continuous program, 137 dB Peak
  • JBL Control 40CS/T is a direct radiating, high impact, 8" subwoofer with a built-in passive crossover network enabling. Frequency Range: 32 Hz - 300 Hz Impedance: 8 ohms (in bypass mode) Transformer Taps: 80W, 40W, 20W (& 10W at 70V only) Maximum SPL (1m): 109 dB (low-impedance, 115 dB peak, center of ceiling) Power Rating: 200 Watts Continuous Program Power and 100 Watts Continuous Pink Noise(400W peak) Dimensions (Diameter x Depth) 332mm Diameter x 338mm Diameter Depth (13.1 in x 13.3 in)
  • JBL Control 328CT has been engineered from the ground up to deliver exceptional next-generation performance in a coaxial point source design ceiling loudspeaker. Frequency Range: (-10dB): 45 Hz – 18 kHz and (±3 dB): 60Hz – 16 kHz Impedance: 8 ohms Maximum SPL (1m): 118 dB (top 70V/100V tap) Transformer Taps: 68W, 34W, 17W, (& 8.5W @ 70V) Coverage Angle: 120° conical, constant directivity Drivers: LF Driver: 200 mm (8 in) and HF Driver: compression driver, 25 mm (1 inch) coil Dimensions (H x W x D): 305 mm (12.0 in.) diameter round baffle x depth from back of baffle of 218 mm (8.6 in)
  • JBL Control 322CT delivers exceptional next-generation performance in a coaxial point source design ceiling loudspeaker. Frequency Range: (-10dB): 32 Hz – 20 kHz and (±3 dB): 48 Hz – 19 kHz Transformer Taps: 100W, 50W, 25W (& 12.5W @ 70V) Sensitivity: 95 dB (1 kHz - 16 kHz) Maximum SPL (1m): 121 dB (top 70V/100V tap) Coverage Angle: 90° conical, constant directivity Drivers: LF Driver: 300 mm (12 in) and HF Driver: compression driver, 37 mm (1.5 inch) coil Dimensions (H x W x D) : 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 240 mm (9.5 in)
  • JBL Control 322C delivers exceptional next-generation performance in a coaxial point source design ceiling loudspeaker. Frequency Range (-10dB): 32 Hz – 20 kHz and (±3 dB): 48 Hz – 19 kHz Power Rating IEC Long-Term System Power Rating: 400 W continuous pink noise (1600 W peak) Impedance: 8 ohms Maximum SPL (1m): 121 dB (127 dB peak) Coverage Angle: 90° conical, constant directivity Drivers: LF Driver: 300 mm (12 in) and HF Driver: compression driver, 37 mm (1.5 inch) coil Dimensions (H x W x D): 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 223 mm (8.8 in)
  • JBL Control 321CT has been engineered from the ground up to deliver exceptional next-generation performance in a coaxial point source design ceiling loudspeaker. Frequency Range: (-10dB): 34 Hz – 18 kHz and (±3 dB): 47 Hz – 16 kHz Maximum SPL (1m): 118 dB (top 70V/100V tap) Coverage Angle: 90° conical, constant directivity Drivers: LF Driver: 300 mm (12 in) and HF Driver: compression driver, 25 mm (1 inch) coil Power Rating: 250 W continuous pink noise (1000 W peak), 2 hrs 200 W continuous pink noise (800 W peak), 100 hrs Dimensions (H x W x D): 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 240 mm (9.5 in)
  • JBL Control 321C has been engineered from the ground up to deliver exceptional next-generation performance in a coaxial point source design ceiling loudspeaker. Frequency Range: (-10dB): 34 Hz – 18 kHz and (±3 dB): 47 Hz – 16 kHz Impedance: 5.6 ohms Maximum SPL (1m): 118 dB (124 dB peak) Coverage Angle: 90° conical, constant directivity Drivers: LF Driver: 300 mm (12 in) and HF Driver: compression driver, 25 mm (1 inch) coil Power Rating: 250 W continuous pink noise (1000 W peak), 2 hrs 200 W continuous pink noise (800 W peak), 100 hrs Dimensions (H x W x D): 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 223 mm (8.8 in)
  • JBL Control 312CS is an excellent addition to JBL Control 321, 322 and 328 loudspeaker systems, or any fullrange loudspeaker system that requires extended bass response. Frequency Range: (±3 dB): 34 Hz – 3.5 kHz and (-10dB): 30 Hz – 4.5 kHz Maximum SPL (1m): 125 dB (low-impedance, 131 dB peak, center of ceiling) Impedance: 8 ohms Drivers: 300 mm (12 in) subwoofer Ceiling Cutout Size: 378 x 378 mm (14.9 x 14.9 in) (for MTC-300BB12 backcan) Power Rating: 400 W continuous pink noise (1000 W peak), 2 hrs 250 W continuous pink noise (600 W peak), 100 hrs
  • JBL CWT128-WH Cross fired Waveguide Technology CWT128 is a compact full-range 2-way system designed to provide extremely wide-angle coverage with maximum bandwidth and SPL. System Format: Extremely Wide Angle Coverage Dual 8" 2-Way Loudspeaker System Frequency Response (-10dB): 71 Hz - 20 kHz and (±3 dB): 96 Hz - 19 kHz Coverage Pattern: 160° x 60° Maximum SPL (1m): 129 dB Nominal Impedance: 8 Ohms Dimensions (w x h x d) 811.28 x 259.59 x 300.74 mm (31.94 x 10.22 x 11.84 in)
  • JBL CWT128 Cross fired Waveguide Technology CWT128 is a compact full-range 2-way system designed to provide extremely wide-angle coverage with maximum bandwidth and SPL. System Format: Extremely Wide Angle Coverage Dual 8" 2-Way Loudspeaker System Frequency Response (-10dB): 71 Hz - 20 kHz and (±3 dB): 96 Hz - 19 kHz Coverage Pattern: 160° x 60° Maximum SPL (1m): 129 dB Nominal Impedance: 8 Ohms Dimensions (w x h x d) 811.28 x 259.59 x 300.74 mm (31.94 x 10.22 x 11.84 in)
  • JBL AW295-LS-BK is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap. Frequency Response: (-10dB): 74 Hz – 20 kHz and (±3 dB): 106 Hz – 18 kHz Nominal Impedance: 8 ohms Coverage Pattern: 90° x 50°, rotatable waveguide System Power Rating: 400 W (1600 W peak), 100 hrs Maximum SPL (1m): 125 dB-SPL cont avg (131 dB peak) LF Driver: 1 x JBL 2262H 300 mm (12 in) and HF Driver: JBL 2432H, 38 mm (1.5 in)
  • JBL AW295-LS is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap. Frequency Response: (-10dB): 74 Hz – 20 kHz and (±3 dB): 106 Hz – 18 kHz Nominal Impedance: 8 ohms Coverage Pattern: 90° x 50°, rotatable waveguide System Power Rating: 400 W (1600 W peak), 100 hrs Maximum SPL (1m): 125 dB-SPL cont avg (131 dB peak) LF Driver: 1 x JBL 2262H 300 mm (12 in) and HF Driver: JBL 2432H, 38 mm (1.5 in)
  • JBL AW295-BK is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap. Frequency Response: (-10dB): 43 Hz – 20 kHz and (±3 dB): 53 Hz – 18 kHz Nominal Impedance: 8 ohms Coverage Pattern: 90° x 50°, rotatable waveguide System Power Rating: 500 W (2000 W peak), 100 hrs Maximum SPL (1m): 126 dB-SPL cont avg (132 dB peak) Drivers: LF Driver: 1 x JBL 2262H 300 mm (12 in) and HF Driver: JBL 2432H, 38 mm (1.5 in)
  • JBL AW295 is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap. Frequency Response: (-10dB): 43 Hz – 20 kHz and (±3 dB): 53 Hz – 18 kHz Nominal Impedance: 8 ohms Coverage Pattern: 90° x 50°, rotatable waveguide System Power Rating: 500 W (2000 W peak), 100 hrs Maximum SPL (1m): 126 dB-SPL cont avg (132 dB peak) Drivers: LF Driver: 1 x JBL 2262H 300 mm (12 in) and HF Driver: JBL 2432H, 38 mm (1.5 in)
  • JBL AW266-LS-BK is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap. Frequency Response: (-10dB): 54 Hz – 20 kHz and (±3 dB): 102 Hz – 18 kHz Coverage Pattern: 60° x 60° waveguide Nominal Impedance: 8 ohms Maximum SPL (1m): 125 dB SPL (131 dB peak) System Power Rating: 400 W (1600 W peak) 100 hrs Drivers: LF Driver: 1 x JBL 2262H 300 mm (12 in) and HF Driver: JBL 2432H, 38 mm (1.5 in)
  • JBL AW266-LS is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap. Frequency Response: (-10dB): 54 Hz – 20 kHz and (±3 dB): 102 Hz – 18 kHz Coverage Pattern: 60° x 60° waveguide Nominal Impedance: 8 ohms Maximum SPL (1m): 125 dB SPL (131 dB peak) System Power Rating: 400 W (1600 W peak) 100 hrs Drivers: LF Driver: 1 x JBL 2262H 300 mm (12 in) and HF Driver: JBL 2432H, 38 mm (1.5 in)
  • JBL AW266-BK is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap. Frequency Response: (-10dB): 40 Hz – 20 kHz and (±3 dB): 51 Hz – 18 kHz Nominal Impedance: 8 ohms Coverage Pattern: 60° x 60° waveguide Maximum SPL (1m): 126 dB SPL (132 dB peak) System Power Rating: 500 W (2000 W peak) 100 hrs Drivers: LF Driver: 1 x JBL 2262H 300 mm (12 in) and HF Driver: JBL 2432H, 38 mm (1.5 in) Dimensions (H x W x D in horizontal cabinet orientation): 409 x 732 x 452 mm(16.1 x 28.8 x 17.8 in)
  • JBL AW266 is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap. Frequency Response: (-10dB): 40 Hz – 20 kHz and (±3 dB): 51 Hz – 18 kHz Nominal Impedance: 8 ohms Coverage Pattern: 60° x 60° waveguide Maximum SPL (1m): 126 dB SPL (132 dB peak) System Power Rating: 500 W (2000 W peak) 100 hrs Drivers: LF Driver: 1 x JBL 2262H 300 mm (12 in) and HF Driver: JBL 2432H, 38 mm (1.5 in) Dimensions (H x W x D in horizontal cabinet orientation): 409 x 732 x 452 mm(16.1 x 28.8 x 17.8 in)
  • JBL ASB7118-WH is a high power, lightweight front-loaded vented subwoofer enclosure housing JBL’s exclusive 2269H Ultra Long Excursion 18" Differential Drive woofer. Frequency Response: (-10dB): 22 Hz - 1 kHz and (±3 dB): 34 Hz - 1 kHz Transducer Power Rating (AES): 2000 W (8000 W peak), 2 hrs System Power Rating: 1200 W (4800 W peak), 100 hrs. Nominal Impedance: 8 ohms Maximum SPL (1m): 25 Hz - 200 Hz: 129 dB-SPL cont avg (135 dB peak) Dimensions (H x W x D in vertical orientation): 546 x 560 x 815 mm(21.5 x 22.0 x 32.1 in)
  • JBL ASB7118 is a high power, lightweight front-loaded vented subwoofer enclosure housing JBL’s exclusive 2269H Ultra Long Excursion 18" Differential Drive woofer. Frequency Response: (-10dB): 22 Hz - 1 kHz and (±3 dB): 34 Hz - 1 kHz Transducer Power Rating (AES): 2000 W (8000 W peak), 2 hrs System Power Rating: 1200 W (4800 W peak), 100 hrs. Nominal Impedance: 8 ohms Maximum SPL (1m): 25 Hz - 200 Hz: 129 dB-SPL cont avg (135 dB peak) Dimensions (H x W x D in vertical orientation): 546 x 560 x 815 mm(21.5 x 22.0 x 32.1 in)
  • JBL ASB6128 is a high power subwoofer system comprised of two 460 mm (18 in) SVG Super Vented Gap low frequency drivers in a front-loaded, vented configuration. Frequency Response: (-10dB): 28 Hz – 1 kHz and (±3 dB): 35 Hz – 1 kHz Transducer Power Rating (AES): 2400 W (9600 W peak), 2 hrs System Power Rating: 1600 W (6400 W peak), 100 hrs Nominal Impedance: 4 ohms in parallel-drive mode 2 x 8 ohms in discrete-drive mode LF Driver: 2 x JBL 2242H 460 mm (18 in) SVG™ drivers with 100 mm (4 in) voice coil Maximum SPL (1m): 30 Hz – 100 Hz: 136 dB-SPL cont avg (142 dB peak)100 Hz – 500 Hz: 136 dB-SPL cont avg (142 dB peak)
  • JBL ASB6125-WH is a high power, lightweight front-loaded vented subwoofer enclosure housing two JBL 2265H-1 Differential Drive dual voice coil dual gap 15" woofers. Frequency Response: (-10dB): 32 Hz - 1 kHz and (±3 dB): 38 Hz - 1 kHz Transducer Power Rating (AES): 1600 W (6400 W peak), 2 hrs System Power Rating: 1350 W (5400 W peak), 100 hrs. Maximum SPL (1m): 35 Hz - 400 Hz: 132 dB-SPL cont avg (138 dB peak) Nominal Impedance: 4 ohms in parallel-drive mode2 x 8 ohms in discrete-drive mode Dimensions (H x W x D in vertical orientation): 965 x 419 x 597 mm(38.0 x 16.5 x 23.5 in)
  • JBL ASB6125 is a high power, lightweight front-loaded vented subwoofer enclosure housing two JBL 2265H-1 Differential Drive dual voice coil dual gap 15" woofers. Frequency Response: (-10dB): 32 Hz - 1 kHz and (±3 dB): 38 Hz - 1 kHz Transducer Power Rating (AES): 1600 W (6400 W peak), 2 hrs System Power Rating: 1350 W (5400 W peak), 100 hrs. Maximum SPL (1m): 35 Hz - 400 Hz: 132 dB-SPL cont avg (138 dB peak) Nominal Impedance: 4 ohms in parallel-drive mode2 x 8 ohms in discrete-drive mode Dimensions (H x W x D in vertical orientation): 965 x 419 x 597 mm(38.0 x 16.5 x 23.5 in)
  • JBL ASB6118-WH is a high power subwoofer system comprised of one 460 mm (18 in) SVG Super Vented Gap low frequency driver in a vented, front-loaded configuration for extended bandwidth. Frequency Response: (-10dB): 28 Hz – 1 kHz and (±3 dB): 35 Hz – 1 kHz Transducer Power Rating (AES): 1200 W (4800 W peak), 2 hrs System Power Rating: 800 W (3200 W peak), 100 hrs Nominal Impedance: 8 ohms Maximum SPL (1m): 30 Hz – 100 Hz: 129 dB-SPL cont avg (135 dB peak)100 Hz – 500 Hz: 129 dB-SPL cont avg (135 dB peak)
  • JBL ASB6118 is a high power subwoofer system comprised of one 460 mm (18 in) SVG Super Vented Gap low frequency driver in a vented, front-loaded configuration for extended bandwidth. Frequency Response: (-10dB): 28 Hz – 1 kHz and (±3 dB): 35 Hz – 1 kHz Transducer Power Rating (AES): 1200 W (4800 W peak), 2 hrs System Power Rating: 800 W (3200 W peak), 100 hrs Nominal Impedance: 8 ohms Maximum SPL (1m): 30 Hz – 100 Hz: 129 dB-SPL cont avg (135 dB peak)100 Hz – 500 Hz: 129 dB-SPL cont avg (135 dB peak)
  • JBL ASB6115-WH is a high power, lightweight front-loaded vented subwoofer enclosure housing JBL’s 2265H-1 Differential Drive dual voice coil dual gap 15" woofer. Frequency Response: (-10dB): 32 Hz - 1 kHz and (±3 dB): 42 Hz - 1 kHz Transducer Power Rating (AES): 800 W (3200 W peak), 2 hrs. System Power Rating: 675 W (2700 W peak), 100 hrs. Nominal Impedance: 8 ohms Maximum SPL (1m): 35 Hz - 400 Hz: 126 dB-SPL cont avg (132 dB peak) Dimensions (H x W x D in vertical orientation) 483 x 419 x 597 mm (19.0 x 16.5 x 23.5 in)
  • JBL ASB6115 is a high power, lightweight front-loaded vented subwoofer enclosure housing JBL’s 2265H-1 Differential Drive dual voice coil dual gap 15" woofer. Frequency Response: (-10dB): 32 Hz - 1 kHz and (±3 dB): 42 Hz - 1 kHz Transducer Power Rating (AES): 800 W (3200 W peak), 2 hrs. System Power Rating: 675 W (2700 W peak), 100 hrs. Nominal Impedance: 8 ohms Maximum SPL (1m): 35 Hz - 400 Hz: 126 dB-SPL cont avg (132 dB peak) Dimensions (H x W x D in vertical orientation) 483 x 419 x 597 mm (19.0 x 16.5 x 23.5 in)
  • JBL ASB6112-WH is a high power, lightweight front-loaded vented subwoofer enclosure housing JBL’s 2263H Differential Drive dual coil dual gap 12" woofer. Frequency Response: (-10dB): 35 Hz – 1 kHz and (±3 dB): 43 Hz – 1 kHz Transducer Power Rating (AES):1000 W (4000 W peak), 2 hrs. System Power Rating: 700 W (2800 W peak), 100 hrs. Maximum SPL (1m): 40 Hz - 300 Hz: 126 dB-SPL cont avg (132 dB peak) Nominal Impedance: 8 ohms Dimensions (H x W x D in vertical orientation) 406 x 369 x 483 mm(16.0 x 14.5 x 19.0 in)
  • JBL ASB6112 is a high power, lightweight front-loaded vented subwoofer enclosure housing JBL’s 2263H Differential Drive dual coil dual gap 12" woofer. Frequency Response: (-10dB): 35 Hz – 1 kHz and (±3 dB): 43 Hz – 1 kHz Transducer Power Rating (AES):1000 W (4000 W peak), 2 hrs. System Power Rating: 700 W (2800 W peak), 100 hrs. Maximum SPL (1m): 40 Hz - 300 Hz: 126 dB-SPL cont avg (132 dB peak) Nominal Impedance: 8 ohms Dimensions (H x W x D in vertical orientation) 406 x 369 x 483 mm(16.0 x 14.5 x 19.0 in)
  • JBL ASB4128 is a medium power subwoofer system comprised of two 460 mm (18 in) low frequency drivers in a front-loaded, vented configuration. Frequency Response: (-10dB): 30 Hz – 1 kHz and (±3 dB): 40 Hz – 1 kHz System Power Rating: 600 W (2400 W peak), 100 hrs Maximum SPL (1m): 30 Hz – 100 Hz: 133 dB-SPL cont avg (139 dB peak) 100 Hz – 500 Hz: 133 dB-SPL cont avg (139 dB peak) Nominal Impedance: 4 ohms in parallel-drive mode 2 x 8 ohms in discrete-drive mode LF Driver: 2 x JBL 2042H 460 mm (18 in) drivers with 75 mm (3 in) voice coil
  • JBL AM7215/95-WH speakers are high power, lightweight, 2-way, full-range loudspeaker systems comprised of the JBL Differential Drive dual voice coil and dual magnetic gap. Frequency Response: (-10dB): 34 Hz - 20 kHz and (±3 dB): 40 Hz - 20 kHz Coverage: 90° x 50° and Nominal Impedance: 8 ohms Drivers: LF Driver: 1 x JBL 2265H 380 mm (15 in) and HF Driver: JBL 2432H, 38 mm (1.5 in) Dimensions (H x W x D) 781 x 420 x 503 mm (30.8 x 16.5 x 19.8 in) System Power Rating: Passive mode: 600 W (2400 W peak), 100 hrs Maximum SPL (1m): Bi-amp mode: LF: 128 dB-SPL cont avg (134 dB peak), HF: 135 dB-SPL cont avg (141 dB peak)
  • JBL AM7215/95 speakers are high power, lightweight, 2-way, full-range loudspeaker systems comprised of the JBL Differential Drive dual voice coil and dual magnetic gap. Frequency Response: (-10dB): 34 Hz - 20 kHz and (±3 dB): 40 Hz - 20 kHz Coverage: 90° x 50° and Nominal Impedance: 8 ohms Drivers: LF Driver: 1 x JBL 2265H 380 mm (15 in) and HF Driver: JBL 2432H, 38 mm (1.5 in) Dimensions (H x W x D) 781 x 420 x 503 mm (30.8 x 16.5 x 19.8 in) System Power Rating: Passive mode: 600 W (2400 W peak), 100 hrs Maximum SPL (1m): Bi-amp mode: LF: 128 dB-SPL cont avg (134 dB peak), HF: 135 dB-SPL cont avg (141 dB peak)
  • JBL AM7215/66-WH speakers are high power, lightweight, 2-way, full-range loudspeaker systems comprised of the JBL Differential Drive dual voice coil and dual magnetic gap. Frequency Response: (-10dB): 34 Hz - 20 kHz and (±3 dB): 40 Hz - 18 kHz Coverage: 60° x 60° and Nominal Impedance: 8 ohms System Power Rating: Passive mode: 600 W (2400 W peak), 100 hrs Dimensions(H x W x D): 781 x 420 x 503 mm (30.8 x 16.5 x 19.8 in) Drivers: LF Driver: 1 x JBL 2265H 380 mm (15 in) and HF Driver: JBL 2432H, 38 mm (1.5 in) Maximum SPL (1m): Bi-amp mode:LF: 128 dB-SPL cont avg (134 dB peak), HF: 135 dB-SPL cont avg (141 dB peak)
  • JBL AM7215/66 speakers are high power, lightweight, 2-way, full-range loudspeaker systems comprised of the JBL Differential Drive dual voice coil and dual magnetic gap. Frequency Response: (-10dB): 34 Hz - 20 kHz and (±3 dB): 40 Hz - 18 kHz Coverage: 60° x 60° and Nominal Impedance: 8 ohms System Power Rating: Passive mode: 600 W (2400 W peak), 100 hrs Dimensions(H x W x D): 781 x 420 x 503 mm (30.8 x 16.5 x 19.8 in) Drivers: LF Driver: 1 x JBL 2265H 380 mm (15 in) and HF Driver: JBL 2432H, 38 mm (1.5 in) Maximum SPL (1m): Bi-amp mode:LF: 128 dB-SPL cont avg (134 dB peak), HF: 135 dB-SPL cont avg (141 dB peak)
  • JBL AM7215/64-WH speakers are high power, lightweight, 2-way, full-range loudspeaker systems comprised of the JBL Differential Drive dual voice coil and dual magnetic gap. Frequency Response: (-10dB)34 Hz - 20 kHz and (±3 dB): 40 Hz - 18 kHz Coverage: 60° x 40° Nominal Impedance: 8 ohms System Power Rating: Passive mode: 600 W (2400 W peak), 100 hrs Dimensions (H x W x D): 781 x 420 x 503 mm (30.8 x 16.5 x 19.8 in) Drivers: LF Driver: 1 x JBL 2265H 380 mm (15 in) and HF Driver: JBL 2432H, 38 mm (1.5 in) Maximum SPL (1m): Bi-amp mode: LF: 128 dB-SPL cont avg (134 dB peak), HF: 135 dB-SPL cont avg (141 dB peak)

Title

Go to Top