RCF BM 3003 paging microphone allows to make selective calls to 3 zones and is the ideal complement of the mixer amplifier. The inputs 2 and 3 of the RCF BM 3003 amplifier have a RJ 45 port to connect a paging microphone quickly and directly. The paging microphones by using 1 or more additional power supply units. FREQUENCY RESPONSE: (-3dB): 50 Hz ÷ 18 kHz IT CAN BE DIRECTLY CONNECTED TO AMPLIFIERS PRODUCT DIMENSION(W x D x H): 100 mm/3.94 in x 159 mm/6.26 in x 48 mm/1.89 in

It is a multipurpose two-way full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make the speaker suitable for almost any environment and architectural constraint. POWER HANDLING: 80 W RMS AND 320 W PEAK FREQUENCY RESPONSE (-10DB): 80 Hz ÷ 20000 Hz 5.5" WOOFER, 1.2" v.c AND 1.0" COMPRESSION DRIVER, 1.0" v.c COVERAGE ANGLE: HORIZONTAL 90° AND VERTICAL 90° PRODUCT DIMENSION(W x D x H): 175 mm/6.89 in x 185 mm/7.28 in x 303 mm/11.93 in

MT 7308 is a power amplifiers manager unit of the DXT 7000 Voice Alarm system, suitable to control up to 8 additional power amplifiers and several speaker lines, according to EN 54-16 norm. It works connected to the MU 7100EN master unit. When speaker lines drive high power loads, it could be convenient to optimize the system configuration by using one or more dedicated power amplifiers dimensioned according the loads involved.

RCF TTS56-A is a high-power, high-output active subwoofer system that sets a new standard in the touring sound reinforcement. The 21" neodymium design represents the result of many years dedicated in pioneering new solutions for the transducers technology. The integration of the 6800 W, 2-channel digital amplification and the advanced digital processing set a new standard for distortion, noise and thermal efficiency. 2x 3400 W digital amplifiers 2x 21" high power neodymium woofers 96kHz, 32-bit DSP processing

The TTL6-A is a high power, three way, active line source engineered to deliver high fidelity output for use indoors and outdoors, for medium to large spaces. TTL6-A provides all the advantages of line array technology, such as high direct sound, increased range and a uniform level distribution, with additional ease of use. It is the preferred sound set-up for stacked systems and when a wider dispersion is required. The 3-way TTL6-A line source is equipped with 2 x 12” low frequencies woofers, 4 x 6.5” midranges and a 3.0” voice coil compression driver with wave-guide for distinctive homogenous directivity. The integration of four channels of digital amplification and the advanced digital processing set a new standard for distortion, noise and thermal efficiency. 4 x Class D amplifier, 2200 Watt total power 1.4" neo compression driver, 3.0" voice coil with a waveguide 4 x 6.0" neo midranges 2 x 12" neo woofers 139dB max SPL

The RCF TTL 55-A WP Stadium is a high-power, three-way, active line array module engineered to deliver an incredible output for use in outdoor large spaces. The three new designs for the six neodymium transducers powering the system result from long-lasting research in pioneering new solutions using the best materials available on the market. The mechanical suspension and orientation system is made of high-quality steel. The suspension system is directly connected to the aluminum sides of the cabinet and is particularly precise and easy to use. 3500 W, four-way digital amplification 2 x 12” high power neodymium woofers, 4” v. c. 10” neodymium midrange, 3.5” v. c. 3 x 1.5” neodymium compression drivers, 2.5” v. c. 96 kHz, 32-bit DSP processing

RCF AM 6020 is specially designed for use on vehicles such as cars, trucks, boats, etc. Its dimensions fit DIN standards for easy installation in the normal vehicle radio space and fittings. The AM 6020's 600 Hz siren is especially useful on boats in foggy conditions. 2 UNBALANCED AUX STEREO INPUTS ON DIY COMPUTER ONE TONE SIGNAL GENERATOR 600 Hz9(Siren) PROTECTION AGAINST OVERLOAD AND SHORT CIRCUIT PRODUCT DIMENSION(W x D x H): 200 mm/7.87 in x 190 mm/7.48 in x 50 mm/1.97 in

RCF BM 3022 microphone with hi-quality unidirectional electret capsule Direct connection to power amplifiers input through CAT5 cable. Adjustable line output with RJ45 connector Switchable automatic gain control (AGC) Up to 30 BM 3022 paging microphones can be linked in a daisy-chain.

RCF TX 4016 wireless microphone 4000 series has 144 individual channels. The channels are divided into 12 groups, each with 12 different frequencies. The series can work with 16 individual channels active at the same time. Using extremely performance antenna, the TX 4016 receiver allow getting a very wide radio cover.  FREQUENCY RESPONCE (-3DB): 50 Hz ÷ 50 kHz 3 RF OUTPUT POWER LEVEL SELECTION AUTO SCAN FUNCTION FOR EASY OPERATION PRODUCT DIMENSION(W x D x H): 210 mm/8.27 in x 155 mm/6.1 in x 44 mm/1.73 in

RCF MD 7600 is a dynamic unidirectional microphone with a 3-pole XLR connection, equip with internal anti-pop filter and ON/OFF switch with safety lock insert. It handling due to the optimum capsule suspension and it also works as professional microphone with excellent reproduction of speech and vocals. ON/OFF switch with lock PRODUCT DIAMETER: 48 mm/1.89 inch AND HEIGHT: 180 mm/7.09 inch

RCF F 10XR features 4 Mic Preamp Inputs, 2 Mono Line Inputs, 4 Stereo Line Inputs plus multi-FX and Recording via USB port, with balanced +28dB main output (Stereo XLR + TRS) and 2 single control compressors. And the Mono channels are provided with 3-band EQ and Stereo with 2-band. PRO DSP FX ONBOARD WITH 16 PRESETS 2 SINGLE CONTROL COMPRESSORS PRODUCT DIMENSION(W x D x H): 294 mm/11.57 in x 275 mm/10.83 in x 82 mm/3.23 in

RCF E 16 provides twelve studio-quality 54 dB gain range Mic preamps with combo connectors. Two line inputs are switchable to Hi-Z input. The input section also features two stereo line inputs and a stereo return. Input channels from 1 to 6 are equipped with a single-control compressor.